Igår kväll kände jag mig extra modig och drog då in current
Bytte mirror i /etc/slackpkg/mirrors till Current och allt gick faktiskt väldigt bra, fick dra in Nvidia drivers igen men annars var det inga problem.
Eller ja det är ju alltid problem med något
Kör en del småspel och så från steam och detta slutade då självklart att fungera.
Har kört in 32-bit libs från nvidia installern och även kört in multilib och även försökt att köra en slackpkg reinstall multilib fast jag får ändå följande felmedelande när jag kör steam
Kod: Markera allt
Slackware 32-bit: Check the 'deps/<slackwareversion>' directory where you downloaded this package and install/upgrade the packages you find there.
Slackware 64-bit multilib: Install/upgrade the packages in the 'deps/<slackwareversion>/multilib' subdirectory instead.
Running Steam on slackware 14.2 64-bit
STEAM_RUNTIME is enabled automatically
Pins up-to-date!
Error: You are missing the following 32-bit libraries, and Steam may not run:
libGL.so.1
libEGL.so.1
libGL.so.1
libgraphite2.so.3
Kod: Markera allt
Configuration for slackpkg+. See /usr/doc/slackpkg+-*/README for more details
# Please read manpage: "man slackpkgplus.conf" and documentation /usr/doc/slackpkg+-*/README
# Enable (on) / Disable (off) slackpkg+
SLACKPKGPLUS=on
# set to '0' to never show the download progress bar
# set to '1' to show the bar only in download packages (default)
# set to '2' to always show the download bar
# set to '3' for a debug mode
VERBOSE=1
# By default slackpkg+ deny to install 32bit packages.
#
# Set this flag to 'on' allow slackpkg+ to install 32bit packages on a 64bit slackware
# installation (possibly unsafe). Please, do not install both 32 and 64bit of the same
# package to avoid problems, and NEVER upgrade existant 64bit packages with relative 32bit package.
# Do not forget to install the multilibs.
ALLOW32BIT=off
# Enable (1) / Disable (0) the official slackpkg blacklist. May be useful to temporarily skip
# the slackware blacklist. You can also override it from command line:
# 'USEBL=0 slackpkg upgrade-all'
USEBL=1
# Add custom option to 'wget'.
# You can solve the repository indisponibility issue by set a timeout here
WGETOPTS="--timeout=20 --tries=2"
# If you want replace wget with another downloader search DOWNLOADCMD in documentation
# at /usr/doc/slackpkg+-*/README
#DOWNLOADCMD="wget -O"
# Defines if the changelog of any 3rd party repository must be searched in parent URL when not found in base URL.
# Can be set to "on" or "off" (default)
SEARCH_CLOG_INPARENT=on
# Use the cache for metadata files (CHECKSUMS.md5,...). Enable it (on) to speedup the slackpkg update
# process by downloading just new files (see README). Disabled by default (off)
CACHEUPDATE=off
# You can download-only by setting DOWNLOADONLY to 'on'. You may (you should) also use it in commandline
# for example: "DOWNLOADONLY=on slackpkg upgrade-all". Useful for large upgrades.
#DOWNLOADONLY=off
# Enable (on) / Disable (off) notification events (see notifymsg.conf)
#ENABLENOTIFY=off
# Enable (on) / Disable (off) the greylist feature. See /etc/slackpkg/greylist
GREYLIST=on
# Defines if commands 'search' and 'file-search' are case-sensitive (on) or not (off). Default to "on"
SENSITIVE_SEARCH=on
# Defines if command 'file-search' does search Wole Word (on) of accept partial words (off). Note that
# you may obtains many many results searching a short partial word
WW_FILE_SEARCH=on
# Select the show order in dialogbox. Available "package" "repository" "tag" "path" "arch"
SHOWORDER=package
# Allow to show more details of the package in slackpkg info <package>. Accept "none", "basic", "filelist"
DETAILED_INFO=none
# Enable (on) / Disable (off) a Strict GPG Check. A repository should contains packages signed
# with the only original GPG-KEY. In some custom repository may be wanted to mix heterogeneous
# packages; to use that repository set Strict GPG Check to off. P.S: a repository can
# contain just ONE gpg-key; you may manually import the other.
STRICTGPG=on
# If two or more repositories contains some same packages, you can specify
# from which repository you prefer to search it.
# The syntax is "<repository_name>:<package_name>"
# Accepts regular expressions. To give priority to an entire repository use "<repository_name>"
# Examples:
#PKGS_PRIORITY=( restricted:vlc )
# OR
#PKGS_PRIORITY=( myrepo )
#
# if you have two reporitories to give priority you must set both in the same line
#PKGS_PRIORITY=( myrepo restricted:vlc )
#
# if you want to install 'ktown' repository you must set it here
#PKGS_PRIORITY=( ktown )
# and DO NOT MISS to read special instruction on /usr/doc/slackpkg+-*/repositories.txt
#
# If you want a multilib system, uncomment the multilib repository and set:
PKGS_PRIORITY=( multilib )
#
# (Use /usr/doc/slackpkg+-*/setupmultilib.sh to setup a multilib configuration)
#
# For both multilib and ktown set
#PKGS_PRIORITY=( multilib ktown )
# Otherwise you can try to upgrade a package from a repository that contains a package with the
# same tag of the already installed package. Tipically that means to upgrade a package from the
# same author of the already installed package.
# Note that this method may not works properly where two repositories contains a package with the
# same tag.
# Set TAG_PRIORITY to 'on' to enable this function
TAG_PRIORITY=off
# List repositories you want to use (defined below)
# remember to launch 'slackpkg update' if you modify that row.
#REPOPLUS=( slackpkgplus restricted alienbob slacky )
REPOPLUS=( slackpkgplus )
# Define mirrors (uncomment one or more mirror; remember to add it to REPOPLUS)
# GPG Note: after adding/renaming a repository, you must to run 'slackpkg update gpg'
# some repositories as salixos, have a partial GPG support;
# for that repositories you may need to run slackpkg with 'slackpkg -checkgpg=off ...'
# Slackware 14.2 - x86_64
#MIRRORPLUS['multilib']=http://bear.alienbase.nl/mirrors/people/alien/multilib/14.2/
#MIRRORPLUS['alienbob']=http://bear.alienbase.nl/mirrors/people/alien/sbrepos/14.2/x86_64/
#MIRRORPLUS['restricted']=http://bear.alienbase.nl/mirrors/people/alien/restricted_sbrepos/14.2/x86_64/
#MIRRORPLUS['slacky']=http://repository.slacky.eu/slackware64-14.2/
# use this to keep the slackpkg+ package updated to the latest stable release
MIRRORPLUS['slackpkgplus']=http://slakfinder.org/slackpkg+/
# use the development branch to use the mainline version and help develop by reporting bugs.
#MIRRORPLUS['slackpkgplus']=http://slakfinder.org/slackpkg+dev/
# Slackware current - x86_64
MIRRORPLUS['multilib']=http://bear.alienbase.nl/mirrors/people/alien/multilib/current/
MIRRORPLUS['alienbob']=http://bear.alienbase.nl/mirrors/people/alien/sbrepos/current/x86_64/
MIRRORPLUS['slackpkgplus']=http://slakfinder.org/slackpkg+/
# Local repository:
#MIRRORPLUS['alienbob']=file://repositories/alien/sbrepos/14.2/x86/
#
# Local packages (you do not need metadata nor 'slackpkg update' command):
#MIRRORPLUS['myrepo']=dir://repositories/mypackages/
#
# Supported Repositories (see /usr/doc/slackpkg+-* for details and notes):
#
#slackpkgplus: http://slakfinder.org/slackpkg+{,dev,1.6,1.7}/
#multilib: http://bear.alienbase.nl/mirrors/people/alien/multilib/{14.0,14.1,14.2,current}/
#alienbob: http://bear.alienbase.nl/mirrors/people/alien/sbrepos/{14.0,14.1,14.2,current}/{x86,x86_64}/
#ktown: http://bear.alienbase.nl/mirrors/alien-kde/{14.2,current}/5/{x86,x86_64}/
#restricted: http://bear.alienbase.nl/mirrors/people/alien/restricted_sbrepos/{14.0,14.1,14.2,current}/{x86,x86_64}/
#slacky: http://repository.slacky.eu/slackware{,64}-{14.0,14.1,14.2}/
#mleddesktop: http://slackware.uk/microlinux/desktop-{14.1,14.2}-{32,64}bit/
#mledextras: http://slackware.uk/microlinux/extras-{14.1,14.2}-{32,64}bit/
#mles: http://slackware.uk/microlinux/server-{14.0,14.1,14.2}-{32,64}bit/
#msb: http://slackware.uk/msb/{14.0,14.1,14.2,current}/{1.6,1.8,1.10,1.12,1.14,1.16,1.18,1.19,latest}/{x86,x86_64}/
#csb: http://slackware.uk/csb/{14.1,14.2,current}/{x86,x86_64}/
#slackers: http://slack.conraid.net/repository/slackware64-current/
#slacke18: http://ngc891.blogdns.net/pub/slacke18/slackware{,64}-{14.1}/
#studioware: http://slackware.uk/studioware/14.2
#slackonly: http://packages.slackonly.com/pub/packages/{14.1,14.2,current}-{x86,x86_64}/
#rlworkman: http://rlworkman.net/pkgs/{14.0,14.1,14.2,current}/
#slackel: http://www.slackel.gr/repo/{i486,x86_64}/current/
#connochaetos: http://connochaetos.org/slack-n-free/slack-n-free{,64}-{14.2}/
#slint: http://slackware.uk/slint/{i586,x86_64}/slint-{14.2,testing}/
#salixos: http://download.salixos.org/{i486,x86_64}/{14.0,14.1,14.2}/
#salixextra: http://download.salixos.org/{i486,x86_64}/extra-{14.2}/