Mus och tangentbord funkar ej efter ny kernel m.m

Slackware på Laptop? Ställ era frågor här.

Moderatorer: Nille, Minime

Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Mus och tangentbord funkar ej efter ny kernel m.m

Inlägg av Ante888 »

Hej
Installerade Slackware igen efter något år utan någon linuxanvändning överhuvudtaget.
Jag sitter på en bärbar acer Aspire 5021WLMI.
Först funkade det hyffsat med det mesta örutom att jag fick använda vesadrivrutiner till mitt grafikkort (Ati x700 128mb pci express). Försökte fixa detta men lyckades inte. Datorn var väldigt instabil och tangentbordet och eller musen hängde sig hela tiden. Då lade jag in en ny kernel 2.6.16 och lade till stöd för amd processor och genast blev den mer stabil men då fick jag problemet att varken min usb-mus eller mitt usb-tangentbord ville fungera. plattan på datorn funkar samt det inbygda tangentbordet. Innan så fungerade dock inte båda mössen samtidigt men jag kunde byta genom att köra setupskriptet för musen genom pkgtool.
Mitt andra problem är grafikkortet. Jag kan inte ha högre upplösning än 1024x768. Stod någonstans att nya x.org 6.9 skulle stödja mitt kort men jag har efter en dags försök inte lyckats installera det. Kan det bli problem eftersom det är pci express?
Vore tacksam om någon kan hjälpa mig med något åtminstone.

//Ante
jenso
Gud
Inlägg: 1823
Blev medlem: 08 okt 2003 10:35

Inlägg av jenso »

Dels behöver du förmodligen, ATIs egna drivare. Men även ett nytt udevpaket och andra uppdateringar.
Finns de inte i current, finns de här http://piterpunk.info02.com.br/extra/
Glöm inte att göra rc.udev körbart, om du inte har det.

/Jens
Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Inlägg av Ante888 »

Okej har installerat udev nu. hur gör jag rc.udev körbart?

Försökte installera de nya drivrutinerna enligt fuide på Slackware.se http://www.slackware.se/?mod=kolla_arti ... &artid=207 Detta funkade bra en bit men när jag körde kommandot ./make.sh så rullade det fram en del text och sen kommer detta fram som verkar fel:

ld: Relocatable linking with relocations from format elf64-x86-64 (/lib/modules/fglrx/build_mod/2.6.x/libfglrx_ip.a.GCC3) to format elf32-i386 (/lib modules/fglrx/build_mod/2.6.x/fglrx.o) is not supported
make[2]: *** [/lib modules/fglrx/build_mod/2.6.x/fglrx.o] Error 1
make[1]: *** [_module_/lib/modules/fglrx/build_mod/s.6.x] Error 2
make[1]: Leaving directory '/usr/src/linux-2.6.16'
make: *** [kmod_build] Error 2
build failed with return value 2

Kan inte kopiera text från konsollen så jag fick skriva av det här därför skrev jag inte allt.
Vad kan det bero på?
jenso
Gud
Inlägg: 1823
Blev medlem: 08 okt 2003 10:35

Inlägg av jenso »

Testa med att göra filen ati-driver-installer-8.22.5-i386.run körbar. Sammaledes om du har en nyare.
chmod 755 ati-driver-installer-8.22.5-i386.run
Sedan
./ati-driver-installer-8.22.5-i386.run
Du ska då få upp en dialog.
När det är klart, kör då aticonfig -h eller aticonfig --help om jag minns rätt.
Du märker vad som är rätt.
Följ anvisningarna.

/Jens
Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Inlägg av Ante888 »

Nu har jag försökt installera drivrutinerna men jag vet inte om det funkade. Jag kom så långt att jag fick upp en grafisk del där man kunde välja lite jag valde att installera drivrutinerna automatiskt. "Guiden" körde klart och sen så startade jag om. märker ännu ingen skilnad och det enda som hänt är att det inte går att starta dvd-film vilket gick förut men otroligt segt (bilden hackade fram). Om drivrutinerna blev installerade hur använder jag dem då? och hur kan jag se om de är installerade. fick föresten upp upplösningen precis innan det så den klarar sig men att den inte klarar se på film är ju inte alltför kul.

//Ante
jenso
Gud
Inlägg: 1823
Blev medlem: 08 okt 2003 10:35

Inlägg av jenso »

Körde du aticonfig?
Hur valde du vid xorgconfig?
Hur ser din /etc/X11/xorg.conf ut?
Laddas modulerna? Kolla med lsmod.

/Jens
Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Inlägg av Ante888 »

När jag skulle köra ariconfig efter det grafiska så kom det upp "cannot execute binary file"
Har inte kört xorgconfig men kollade där och hittade inga nya drivruiner valde att inte skriva om filen eftersom inget ändrats
När jag kör lsmod så är det endast ntfs som körs.
Så här ser xorg.conf ut:
# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "se"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-130

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 48-170

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "* Generic VESA compatible"
Driver "vesa"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x800" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection
jenso
Gud
Inlägg: 1823
Blev medlem: 08 okt 2003 10:35

Inlägg av jenso »

Om jag förstod rätt, har du inte kört xorgconfig först?
Det måste du göra. Står även i dokumentationen, som medföljer ATI installationen.
Från min xorg.conf.

Kod: Markera allt

#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks     25.2 28.3
        Identifier  "Standard VGA"
        Driver      "vga"
        VendorName  "Unknown"
        BoardName   "Unknown"
EndSection

Section "Device"

    #VideoRam    65536
    # Insert Clocks lines here if appropriate
        Identifier  "** ATI Radeon (generic)               [radeon]"
        Driver      "radeon"
EndSection

Section "Device"
        Identifier  "ATI Graphics Adapter 0"
        Driver      "fglrx"
        BusID       "PCI:3:0:0"
EndSection

Section "Screen"
        Identifier "Screen 1"
        Device     "** ATI Radeon (generic)               [radeon]"
        Monitor    "My Monitor"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1600x1200" "1280x1024" "1024x768"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes    "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
Du hittar dokumentationen i, /usr/share/doc/fglrx/

/Jens
Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Inlägg av Ante888 »

Körde xorgconfig och valde "ati radeon generic".
När jag körde startx så kom det då upp "no devices found"
precis som innan.
Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Inlägg av Ante888 »

Installerade även om drivrutierna nu. Gjorde som det stod att man skulle spara sin xorg.conf (jag körde xorgconfig) valde ati radeon generic och sedan försökte jag köra aticonfig. Då kom det endast fram "cannot execute binary file". Sedan startade jag om och när jag körde startx fick jag samma som ovan.
jenso
Gud
Inlägg: 1823
Blev medlem: 08 okt 2003 10:35

Inlägg av jenso »

bash-3.00# aticonfig --initial --input=/etc/X11/xorg.conf
Och
bash-3.00# aticonfig --resolution=1600x1200,1280x1024,1024x768

/Jens
Ante888
Besökare
Inlägg: 7
Blev medlem: 16 jun 2004 14:06

Inlägg av Ante888 »

Tack för hjälpen.
Ska testa det så fort jag får chansen testar en annan dist för tillfället men kommer nog gå tillbaka till slackware igen(kör gentoo nu).