Hej .
Detta är mitt problem:
Jag har kopierat över mitt system till en ny partition, jag kan starta både det gamla systemet och det nya.
Men när jag skall starta X så kommer det bara upp ett felmedelande.
jag kör slackware 9.1 med en grafikdriver från nvidia (gforce-kort)
Vad är det som är fel ?
X startar ej efter migrering av system
Moderatorer: Nille, nomicon, Minime
Problemet är fixat !
Nu är jag mest intreserad av att veta varför det inte fungerade på en gång.
Här är dialogen på forumet där jag fick hjälp.
egag
Member
Registered: Jul 2004
Location: Netherlands
what errors do you get on " startx " ?
egag
__________________
...to me , Microsoft and McDonalds look the same...
Don't like the product but the clown is coool....
__________________
I thinks it say's it can't find /dev/mem
I have tried to reconfigure xfree but without any success . . .
To me . . . The swedish chef in The muppet show , sounds like his from the Netherlands !
__________________
Ok ! here is the last part of the log file:
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NV(0): Initializing int10
(EE) NV(0): Cannot open /dev/mem
(--) NV(0): Chipset: "GeForce2 GTS"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xF0000000
(--) NV(0): MMIO registers at 0xEE000000
Fatal server error:
xf86MapVidMem: failed to open /dev/mem (No such file or directory
__________________
/dev/mem is "Physical memory access".
you could try : " #mknod /dev/mem c 1 1 "
and i can't understand the cook
egag
__________________
It worked ! thanks a lot !
Question 1 : why was the '/dev/mem' stuff not copyed over to my new partition ?
Question 2: Is it possible to just edit XF86Config to reactivate the 3D driver from Nvidia , or do one have to reinstall it from scratch ?
Nu är jag mest intreserad av att veta varför det inte fungerade på en gång.
Här är dialogen på forumet där jag fick hjälp.
egag
Member
Registered: Jul 2004
Location: Netherlands
what errors do you get on " startx " ?
egag
__________________
...to me , Microsoft and McDonalds look the same...
Don't like the product but the clown is coool....
__________________
I thinks it say's it can't find /dev/mem
I have tried to reconfigure xfree but without any success . . .
To me . . . The swedish chef in The muppet show , sounds like his from the Netherlands !
__________________
Ok ! here is the last part of the log file:
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NV(0): Initializing int10
(EE) NV(0): Cannot open /dev/mem
(--) NV(0): Chipset: "GeForce2 GTS"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xF0000000
(--) NV(0): MMIO registers at 0xEE000000
Fatal server error:
xf86MapVidMem: failed to open /dev/mem (No such file or directory
__________________
/dev/mem is "Physical memory access".
you could try : " #mknod /dev/mem c 1 1 "
and i can't understand the cook
egag
__________________
It worked ! thanks a lot !
Question 1 : why was the '/dev/mem' stuff not copyed over to my new partition ?
Question 2: Is it possible to just edit XF86Config to reactivate the 3D driver from Nvidia , or do one have to reinstall it from scratch ?